Replacing endshield – MacDon D65 SP DHOM User Manual
Page 231
Advertising
Replacing Endshield
1.
Lower header and reel, and shutdown engine. Remove key from ignition.
2.
Manually rotate reel for access to endshield (A) to
be replaced.
3.
Remove three bolts (B).
Figure 6.200: Endshields
4.
Lift end of endshield (A) off support (B).
Figure 6.201: Endshields
5.
Lift endshield off supports.
Figure 6.202: Endshields
169899
219
Revision A
Advertising