MacDon D65 SP DHOM - Manual (Page 243)

MAINTENANCE AND SERVICING
Installing Reel Drive Motor
To install the reel drive hydraulic motor, follow these steps:
1. Slide motor mount (A) up or down so that mounting
holes are accessible through openings in chain case.
2. Attach motor (B) and spacer (C) to motor mount with
four 1/2 in.x 1.75 countersunk bolts (D).
3. Secure motor with lock nuts (E).
4. Torque nuts to 54 lbf·ft (73 N·m).
5. If installing new motor, install fittings (F) from old motor
onto new motor.
Figure 6.231: Reel Drive Motor
A - Motor Mount B - Hydraulic Motor C - Spacer
D - Bolts E - Lock Nuts F - Hydraulic Fittings
6. Reattach hydraulic lines (A) to motor (B).
Figure 6.232: Reel Drive
169899 231 Revision A