MacDon D65 SP DHOM - Manual (Page 241)

MAINTENANCE AND SERVICING
Loosening Drive Chain
1. Loosen nuts (A). Slide motor (B) and motor mount (C)
down towards reel shaft.
Figure 6.226: Reel Drive
Removing Drive Sprocket
1. Remove the drive chain (A) from the drive sprocket (B).
Figure 6.227: Reel Drive
2. Remove the cotter pin (A), slotted nut (B), and flat
washer (C) from the motor shaft.
3. Remove the drive sprocket (D). Ensure key remains in
the shaft.
IMPORTANT:
Do NOT use pry bar and/or hammer to remove drive
sprocket (D). This will damage the motor. Use a puller if
drive sprocket does not come off by hand.
Figure 6.228: Reel Drive
169899 229 Revision A