MacDon D65 SP DHOM User Manual
Page 194
Advertising
7.
Insert a pry bar (A) in hole in deck located at
approximately the deck mid-point, and lift deck clear
of cutterbar.
NOTE:
Pry bar should be of sufficient length to
accommodate width of draper.
8.
Support pry bar (A) on a stand (B) of suitable height.
Figure 6.113: Lifting the Deck
9.
Pull draper off deck onto pry bar.
10. Remove stand (B), draper, and pry bar (A).
Figure 6.114: Removing Draper
169899
182
Revision A
Advertising