MacDon D65 SP DHOM - Manual (Page 49)

OPERATION
3. Use handle (B) to move lock rod (A) to outboard
position.
Figure 4.6: Center Arm Safety Prop
4.2.3 Endshields
A hinged, polyethylene endshield is fitted on each end of the header.
Opening Endshields
To open an endshield, follow these steps.
1. Remove lynch pin (A) and tool (B) from pin (C) at top
rear of endshield.
Figure 4.7: Endshield
169899 37 Revision A