MacDon D65 SP DHOM - Manual (Page 103)

OPERATION
5. Remove clevis pin (A) and set aside for
later installation.
6. Push latch (B) and lift tow-bar (C) from hook.
Release latch.
7. Reinstall clevis pin.
Figure 4.73: Tow-Bar Latch
Storing Tow-Bar
Store tow-bar as follows:
1. At the left end of the header, place the inner end
of the outer half of the tow-bar in cradle (A) on
header backtube.
2. For clevis or pintle end of tow-bar, secure in support (B)
on endsheet with hitch pin (C). Secure with lynch pin.
3. Install rubber strap (D) on cradle (A).
Figure 4.74: Tow-Bar Storage
169899 91 Revision A