MacDon D65 SP DHOM User Manual
Page 228
Advertising
17. Tighten clamp (A) with modified channel lock pliers (B)
so that finger pressure will NOT move clamp.
IMPORTANT:
Over-tightening clamp may result in breakage.
Figure 6.192: Clamp Tool
18. At the center disc, install the bolts (A) securing arm (B)
to disc.
19. At the tail end, install reel arm (B) and endshield
support (C) at applicable tine tube location with bolts
(A). Re-install endshields.
NOTE:
There are no endshields on the center discs.
Figure 6.193: Tail End
169899
216
Revision A
Advertising