MacDon D65 SP DHOM - Manual (Page 109)

OPERATION
CAUTION
Stand clear of wheels and release linkage carefully as
wheels will drop once the mechanism is released.
1. Pull handle (B) up to release and raise the linkage (A)
fully upward in the vertical support.
2. Raise header fully, stop engine, and remove key from
ignition. Engage header safety props.
Figure 4.85: Raising Linkage
3. Remove hair pin and clevis pin (A).
4. Pull latch handle (B) to release suspension linkage (C)
and pull suspension linkage (C) away from spindle (D).
5. Slowly lower the wheels.
Figure 4.86: Lowering Wheels
6. Lower handle (B) to lock.
Figure 4.87: Locking Linkage
169899 97 Revision A