MacDon D65 SP DHOM - Manual (Page 42)

SPECIFICATIONS
D65
Guard: Pointed / Forged / Double Heat Treated (DHT)
Hold-Down: Sheet Metal / Adjustment bolt O
F
Guard: Pointed / Forged / Case Hardened (CH)
Hold-Down: Sheet Metal / Adjustment Bolt O
F
Guard: Stub / Forged Bottom / Forged Top / Adjustment Plate O
F
Guard: Stub / Forged Bottom / Sheet Metal Top / Adjustment Bolt O
F
Guard: 4 Point / No-choke Design (2 Long Points with Tangs / 2 Short Points without Tangs) O
F
Guard Angle (cutterbar on ground)
Center-Link Retracted 15–25 ft. 7.5 Degrees S
Center-Link Retracted 30–40 ft. 2.5 Degrees S
Center-Link Extended 15–25 ft. 17.0 Degrees S
Center-Link Extended 30–40 ft. 12.0 Degrees S
CONVEYOR (Draper) and DECKS
Draper Width 41-5/8 in. (1057 mm) S
Draper Drive Hydraulic S
Draper Speed 0–742 fpm (225 m/min.) S
15 ft.
60-5/8 – 69-11/16 in.
(1540–1770 mm)
S
Delivery Opening Width (Center Delivery) / Variable by
Shifting Decks
20, 25, 30,
35, 40 ft.
67-1/8 – 76-11/16 in.
(1720–1950 mm)
S
Center-Link
Fully
Retracted
37-5/8 in. (955 mm)
S
Delivery Opening Height (under Frame Tube at 8 in.
Cutting Height )
Center-Link
Fully
Extended
43-1/2 in. (1105 mm)
S
PR15 PICK-UP REEL
Quantity of Tine Tubes 5, 6, or 9
15 to 30 ft. 8 in. (203 mm)
Center Tube Diameter
35 ft. 10 in. (254 mm)
Factory Set 31-1/2 in. (800 mm)
Finger Tip Radius
Adjustment Range
30-3/16 – 31-1/2 in.
(766–800 mm)
Effective Reel Diameter (Via Cam Profile) 65 in. (1650 mm)
Finger Length 11 in. (290 mm)
Finger Spacing (Staggered on Alternate Bats) 6 in. (150 mm)
Reel Drive Hydraulic S
Reel Speed (Auto-Adjust from Cab Using Ground Speed Index) 0–85 rpm S
FRAME and STRUCTURE
169899 30 Revision A