MacDon D65 SP DHOM - Manual (Page 252)

MAINTENANCE AND SERVICING
2. For DOUBLE REEL DRIVE, position the lower cover
(C) first (if removed) and secure with three bolts (D).
Install upper cover (A) using the six bolts (B).
Figure 6.255: Double Reel Drive Cover
6.9.6 Adjusting Reel Drive Chain Tension
Removing Drive Cover
1. Remove the reel drive cover (A) as follows:
a. For SINGLE REEL DRIVE, remove the four
bolts (B) that secure the cover (A) to the reel drive.
b. For DOUBLE REEL DRIVE, remove the six
bolts (B) that secure the upper cover (A) to the
reel drive and to the lower cover (C).
NOTE:
The lower cover (C) may also be removed by
taking off the three bolts (D).
Figure 6.256: Single Reel
Figure 6.257: Double Reel
169899 240 Revision A