Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 18)

2–3 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
This section describes the equipment required to perform the
following application transfers:
•
serial transfer
•
DH+ network transfer
•
ControlNet network transfer
•
Remote I/O Pass-Through transfer
Serial Upload/Download
To transfer applications serially, you need an RS-232 Serial
(Upload/Download) cable (A-B Catalog Numbers 2706-NC13,
2711-NC13, 2711-NC14 for PanelView 1000e/1400e Series F and
later terminals; 2711-NC1 for PanelView 1200e/1400e terminals
Series E and earlier) for connecting the computer to the PanelView
terminal.
The Transfer Utility can transfer applications serially without using
the RSLinx drivers.
Figure 2.1 Connecting the Upload/Download Cable
Upload/Download Cable
2711–NC13, series F or later
2711–NC1, series E or earlier
Equipment Required for
Transferring Applications