Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 39)

2–24 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
7. Choose the program folder (program group) in which you want to
install the FTU32’s icons, which include a Readme file icon, the
Transfer Utility icon, and an Uninstall icon. By default, the icons
are installed in the PanelBuilder 1400e program folder. Then
choose Next.
8. Choose whether the installation utility will modify the
AUTOEXEC.BAT file.
If you are installing on Windows 95, the entry
C:\Progra~1\Rockwe~1\RDM;%Path%
is required in the PATH variable for the FTU32 to work correctly.
If you are installing on Windows NT, the entry
C:\Program Files\Rockwell Software\RDM
is required in the PATH variable in the Environment tab of the
System Properties dialog.
Choose Next to approve the changes and continue.
9. The setup utility shows a summary of the choices you made in the
preceding dialog boxes. To make any changes, choose the Back
button. Otherwise, choose Next to begin the installation.
10. After all the applications have completed installing, you are
prompted to reboot your computer. You can reboot immediately
or later, but you must reboot before you can run the Transfer
Utility or other applications successfully.
If you want to upload or download PanelView files over the PLC
networks after you finish installing the Transfer Utility, you also
need to install RSLinx Lite software, Version 2.0 or later. See the
RSLinx user documentation provided for installation procedures.
Do not cancel the installation while it is in progress. If you want to
undo the installation, let the installation finish, then use Uninstall
PanelView e Transfer Utility to remove all the installed files and to
update the registration.
PanelView 1200/1400e Transfer Utility (FTU) Version 3 is provided
in the PanelView 1200/1400e Transfer Utility kit (2711E-ND7) on
CD.
You can create your own 3.5-inch floppy disks from the CD. For
instructions on how to create floppy disks of the software from the
CD, refer to the Floppies.txt file, in the root directory of the CD.
To install the FTU:
1. Start Windows 95 or Windows 3.x. If you’re already in Windows,
close all open Windows applications.
2. Insert the CD in the drive.
Installing the FTU from the
“PanelView 1200/1400e
Transfer Utilities” CD on
Windows 95 or
Windows 3.x