Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 36)

2–21 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
PanelView 1200/1400e Transfer Utility (FTU) Version 3 is provided
on the PanelBuilder 1400e CD-ROM. The software installation
program creates a directory on your hard drive for the FTU and
copies all necessary files to it. By default, the drive and directory is
C:\AB\PB1400E\FTU. You can change this default.
You can create your own 3.5-inch floppy disks from the CD. For
instructions on how to create floppy disks of the software from the
CD, refer to the Floppies.txt file, in the root directory of the CD.
To install the FTU:
1. Start Windows 95 or Windows 3.x. If you’re already in Windows,
close all open Windows applications.
2. Insert the CD-ROM in the drive.
The CD-ROM begins to run automatically.
3. If the install does not start automatically and you are running on
Windows 95, choose Run from the Start button and select
setup.exe from the CD-ROM drive; or select setup.exe from
Windows Explorer.
If you are running on Windows 3.x, choose Run from the File
menu. In the Run dialog box, type:
d:setup
where d is the drive containing the File Transfer Utility
CD-ROM, and press Enter.
4. In the Welcome dialog box, choose Next.
5. If you are installing on Windows 95, the Select Version dialog
box appears. Choose Version 3, and then choose Next.
If you are installing on Windows 3.x, the Select Version dialog
box does not appear. Version 3 is automatically selected.
Installing the FTU from
PanelBuilder 1400e
CD-ROM on Windows 95
or Windows 3.x