Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 31)

2–16 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
You can install the PanelView e Transfer Utility 32 software using
the CD-ROM provided in the PanelBuilder 1400e software kit (A-B
Catalog Number 2711E-ND1) or using the CD provided in the
Transfer Utility software package (A-B Catalog Number
2711E-ND7).
You can also create your own floppy disks of the PanelView e
Transfer Utility 32 software from the CD this manual was on. For
instructions on how to create floppy disks of the software from the
CD, refer to the Floppies.txt file, in the root directory of the CD.
The CD-ROM includes two install versions for the Transfer Utility
software:
•
Version 3—This version offers you the PanelView 1200/1400e
Transfer Utility (FTU) on an operating system that uses Windows
3.x, or Windows 95. Version 3 supports INTERCHANGE and
WINtelligent LINX drivers for PanelView 1000e, 1200, 1200e,
and 1400e file transfers.
•
Version 5—This version offers you the PanelView e Transfer
Utility 32 (FTU32) software on an operating system that uses
Windows 95 or Windows NT. Version 5 supports RSLinx drivers
for PanelView 1000e, 1200e, and 1400e file transfers.
If your operating system is Windows 3.x, the CD-ROM will install
FTU Version 3. If your operating system is Windows 95, you have a
choice of installing FTU Version 3 or Version 5. If your operating
system is Windows NT, the CD-ROM will install FTU Version 5,
also called FTU32.
General Installation
Information