Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 45)

2–30 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
If you have problems running the File Transfer Utility and you
have had previous versions of the File Transfer Utility on your
computer, we recommend you select “Uninstall Transfer Utility”
in the PanelBuilder 1400e folder. The “Uninstall Transfer Utility”
program deletes any of the shared files and windows system file
conflicts that may exist from earlier installations. You will then
have to reinstall the File Transfer Utility software again. If
problems still exist, contact Allen-Bradley Technical Support. For
Technical Support information, see the Preface in this manual.
The procedure to start the PanelView 1200 Transfer Utility is the
same for Windows 95 and Windows 3.x. This utility, available in
FTU Version 3 and earlier, is used to transfer an application created
in PanelBuilder Development Software for DOS, or PanelBuilder
1200 Configuration Software for Windows. Refer to the PanelView
1200 Transfer Utility User Manual (Publication Number
2711-UM010B–EN–P) for more information.
1. Start the PanelView 1200/1400e Transfer Utility using the
method previously described for your operating system.
2. Choose PanelView 1200 Transfer from the Transfer menu. The
following screen is displayed.
Starting the PanelView
1200 Transfer Utility