Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 92)

6–4 Troubleshooting for the PanelView e Transfer Utility 32
Use the following table to identify Transfer Utility problems you
may encounter due to *.pvd files. In the following error or warning
messages, %s is the name of the file.
Problem Cause What to do
Unable to access specified file %s.
Cause: An unspecified error occurred. (01)
(Error 4100) The specified application file cannot be
read. Ensure the specified application file exists
and is not corrupted.
The upload/download destination may not
be valid or is write protected. Ensure the path is correct and that it is not
write protected.
Unable to access specified file %s.
Cause: The file could not be located. (02)
(Error 4100) The specified application file cannot be
read. Ensure the specified application file exists
and is not corrupted.
The upload/download destination may not
be valid or is write protected. Ensure the path is correct and that it is not
write protected.
Unable to access specified file %s.
Cause: All or part of the path is invalid. (03)
(Error 4100) The path or file name is invalid. Ensure the path and file name is correct
and exists.
Unable to access specified file %s.
Cause: The file could not be accessed (05)
(Error 4100) The file is read-only. Either change the location, change the file
name, or change the file properties to make
the file writeable.
Unable to access specified file %s.
Cause: The disk is full. (13)
(Error 4100) There is not enough disk space. Choose another drive that has available
disk space, or free up some space on the
disk drive that is full.
You must specify a source file name to
download.
(Error 4117) A source file name was not specified. Enter the source file name to download, or
press Browse to select the file to download.
The terminal application filename, %s, is too
long. It will be truncated to 8 characters before
being downloaded.
(Warning 4118) The file name exceeds the maximum 8
characters. The file name is automatically truncated to
8 characters.
The PanelBuilder PVC file “%s” cannot be used
to retrieve communication transfer parameters.
Specify valid PanelView terminal runtime PVD
files only.
(Error 4121) PanelBuilder *.pvc files cannot be
downloaded to the terminal. Specify valid PanelView terminal runtime
*.pvd files only.
You must specify a valid runtime terminal file
from which transfer parameters are to be
retrieved.
These parameters will be used to configure the
current file transfer.
(Error 4122) Either the file name is blank, the file is not a
valid *.pvd file, or the file does not exist. Enter a valid runtime file, or press Browse
to search for one.
Unable to display the release notes for this
application.
The text file located at:
%s
cannot be accessed.
(Error 4123) The Readme.txt file from the install cannot
be found. Reinstall the application, and try again.
The specified upload directory:
%s
cannot be used as a valid upload destination.
Ensure that it is not write-protected and there is
sufficient disk space on the drive.
If necessary, free up some disk space and try
again.
(Error 4124) The upload location either does not exist, is
write-protected, or does not have enough
space. Check that the location exists and is not
write-protected, or free up some space, and
try again.
*.pvd File Errors