Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual User Manual
Page 82
5–10
Configuring Communications Settings for 1000e/1200e/1400e Application Transfers
Network Transfer Method — Network and Driver Configuration
When you select Network as the transfer method, Network Accessed,
Driver, and Transfer Path are the options you can configure.
To select the network:
"
Specify DH+ or ControlNet as the network to which your PC is
connected.
To select the driver:
1. Click the Refresh List button to refresh the list of drivers.
2. Select a driver from the list of available drivers.
Driver options include serial and RSLinx ports. When selecting a
driver, Serial 1 and Serial 2 can be used to communicate directly
with a 1770-KF2/KE or 1770 KFC without using RSLinx. The
other driver selections need RSLinx, which can be installed on
the development computer. For details about installing RSLinx,
see the RSLinx user documentation.