Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 51)

3–5 Uploading 1000e/1200e/1400e Application Files and Alarm History Files
2
For Remote I/O applications, you can change the baud rate. The
following shows the Terminal Network Setup screen for a
Remote I/O application.
3 7 Low
3. When you have selected the required settings, choose OK to exit
the screen.
4. Switch the PanelView terminal to Run mode. The application
starts to run. You can now transfer application files over the
selected network.