Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 76)

5–4 Configuring Communications Settings for 1000e/1200e/1400e Application Transfers
If you have this
communication
hardware Select the corresponding driver Choose one of these
driver packages Select Network
Type and
Address Decide which
transfer link to use
1784-KTCX Network Direct ControlNet WIN LINX 1784-KTC to ControlNet (DH+ Mode)
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
Remote I/O ControlNet WIN LINX 1784-KTC to ControlNet (DH+ Mode)
Pass-Through
WIN LINX using INTERCHANGE to
ControlNet
INTERCHANGE Interchange Port 1 – 8
The procedure and dialog boxes are the same for application
downloads, application uploads, and alarm history uploads.
Configuring communication settings involves the following steps:
•
selecting the transfer method
•
configuring the transfer parameters
•
saving the communication settings
Configuring
Communications