Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual User Manual
Page 85
Advertising
![background image](/manuals/580796/85/background.png)
5–13
Configuring Communications Settings for 1000e/1200e/1400e Application Transfers
Remote I/O Pass-Through — Network, Driver, and
Pass-Through Setup Configuration
When you select Remote I/O Pass-Through as the transfer method,
Network Accessed, Driver, and Pass-Through Setup (Device Type,
Transfer Path, Rack, Word, and Byte) are the options you can
configure.
To select the network:
"
Specify DH+, ControlNet, or Ethernet as the network to which
your PC is connected.
To select the driver:
1. Click the Refresh List button to refresh the list of drivers.
2. Select a driver from the list of available drivers.
Advertising