Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 59)

3–13 Uploading 1000e/1200e/1400e Application Files and Alarm History Files
2
For Remote I/O application files, you can change the baud rate.
The following shows the Terminal Network Setup screen for a
Remote I/O application file.
3 7 Low
3. When you have selected the required settings, choose OK to exit
the screen.
4. Switch the PanelView terminal to Run mode. The application file
starts to run. You can now transfer alarm history files over the
selected network.