Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 49)

3–3 Uploading 1000e/1200e/1400e Application Files and Alarm History Files
5. To transfer an application serially, in the Terminal Configuration
screen, choose the Transfer Application button to display the
Transfer Application screen.
Important: The application file to be uploaded must be the
Current Application in the PanelView terminal.
For more information, refer to “Selecting an
Application” in Chapter 5, “Configuring
PanelView Terminals,” in your PanelView
1000e, 1200e, and 1400e Operator Terminals
User Manual (Publication Number 2711E-6.17).
To prepare the PanelView terminal for a network or Remote I/O
Pass-Through upload:
1. Ensure the application file to be uploaded is the Current
Application in the PanelView terminal. The Current Application
is a file that is currently selected and running on the PanelView
terminal. If you do not want to make changes to the Current
Application’s transfer parameters, follow the next procedure to
configure the Transfer Utility for an upload.
If you want to change the Current Application’s transfer
parameters, switch the PanelView terminal to Configure mode,
using the hardware keyswitch or the Goto Configure Mode
button.