Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 66)

4–4 Downloading 1000e/1200e/1400e Application Files
In the examples below, the first screen displays a ControlNet
transfer setup. The second screen displays a DH+ transfer setup.
Important: After a successful download of an application
file over DH+ or ControlNet, the terminal
automatically resets the Address Source to
Application, uses the application file parameters,
and discards the Manual Address parameters.
5. Make changes to the transfer parameters.
For DH+ transfer setups, you can change both the baud rate and
the terminal network address.
For ControlNet transfer setups, you can change the terminal
network address, not the baud rate.
6. Choose OK. The Current Application is deselected.