Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 68)

4–6 Downloading 1000e/1200e/1400e Application Files
3. Choose RIO Pass-Through as the Address Source. When you
choose RIO Pass-Through, the configuration parameters for the
currently-selected application file are disabled.
4. Make changes to the transfer parameters. For Remote I/O
Pass-Through applications, you can change the baud rate, device
type, and the control byte.
5. Choose OK. The Current Application is deselected.
6. Switch the PanelView terminal to Run mode. The Application
Transfer screen is displayed. You can now transfer application
files over the network.