Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 41)

2–26 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
Do not cancel the installation while it is in progress. If you want to
undo the installation, let the installation finish, then use the Uninstall
Transfer Utility to remove all the installed files and to update the
registration.
For information on how to start and exit from the PanelView 1200
Transfer Utility, see the PanelView 1200 Transfer Utility User
Manual (Publication Number 2711-UM010B–EN–P).
PanelView e Transfer Utility 32 (FTU32) Version 5 runs on
Windows NT/2000 SP2 or Windows 95.
This section describes how to start the program from Windows NT
or Windows 95, and how to start the program from PanelBuilder
1400e.
To start the FTU32 from Windows NT or Windows 95:
1. Click the Start button on the taskbar.
2. Choose Programs, then choose PanelBuilder 1400e or the folder
you specified when you installed the program.
3. Choose PanelView e Transfer Utility 32. The following dialog
box is displayed.
Starting the PanelView e
Transfer Utility 32
Version 5 (FTU32)