Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual - Manual (Page 35)

2–20 Working with the PanelView e Transfer Utility 32
Publication 2711E-UM003B–EN–P
11. Choose the program folder (program group) in which you want to
install the FTU32’s icons, which includes a Readme file icon, the
Transfer Utility icon, and an Uninstall icon. By default, the icons
are installed in the PanelBuilder 1400e program folder. Then
choose Next.
12. Choose whether the installation utility will modify the
AUTOEXEC.BAT file.
If you are installing on Windows 95, the entry
C:\Progra~1\Rockwe~1\RDM;%Path%
is required in the PATH variable for the FTU32 to work correctly.
If you are installing on Windows NT, the entry
C:\Program Files\Rockwell Software\RDM
is required in the PATH variable in the Environment tab of the
System Properties dialog box.
Choose Next to approve the changes and continue.
13. The setup utility shows a summary of the choices you made in the
preceding dialog boxes. To make any changes, choose the Back
button. Otherwise, choose Next to begin the installation.
14. After all the applications have completed installing, you are
prompted to reboot your computer. You can reboot immediately
or later, but you must reboot before you can run the Transfer
Utility or other applications successfully.
If you want to upload or download PanelView files over the PLC
networks, you also need to install RSLinx Lite software, Version
2.0 or later. See the RSLinx user documentation provided for
installation procedures.
Do not cancel the installation while it is in progress. If you want to
undo the installation, let the installation finish, then use Uninstall
PanelView e Transfer Utility to remove all the installed files and to
update the Windows registry.