Rockwell Automation 2711E-ND7 PanelView File Transfer Utility User Manual User Manual
Page 77
![background image](/manuals/580796/77/background.png)
5–5
Configuring Communications Settings for 1000e/1200e/1400e Application Transfers
To select the transfer method:
"
In the main download/upload dialog box, select the
download/upload transfer method.
You can configure the transfer parameters using either of the
following methods:
•
obtain transfer parameter values from an application file
•
manually select the transfer parameter values
Obtain Transfer Parameters from an Application File
An application file is a *.pvd file that runs on a PanelView terminal.
It is also called a runtime PV file. When selected, all the transfer
parameter values from the *.pvd file are placed in the appropriate
transfer parameters in the Configure Transfer Method dialog box.
For ControlLogix bridging, you cannot obtain transfer parameter
values from an application file.
Selecting the Transfer
Method
Configuring the Transfer
Parameters