Pre-assemble 2s-2600 lh clutch, Prepare new 2s-2600 lh power shaft – Great Plains Electric Clutch Package User Manual
Page 11
Great Plains Manufacturing, Inc.
Update 2S-2600 Left Hand Drive
7
03/24/2009
195-073M
Pre-Assemble 2S-2600 LH Clutch
15. Select one each new:
823-231C OGURA CLUTCH
195-347D ELECTRIC CLUTCH ADAPTOR
and three sets new:
802-684C HHCS M8X1.25X55 GR8.8
804-157C WASHER SPRING LOCK M8 PLT
Place the tab end of
down on a work surface.
16. Secure the large end of the 195-347D adaptor
to
the Ogura clutch
with the bolts
and lock wash-
ers
. Torque to specifications (see page 93).
Note: Note that the 195-347D adaptor
has alternating
smooth and tapped (threaded)
1
⁄
4
in holes.
17. Select the saved:
SPKT 40A23X1.813-1.818 BR/6HOL
and three sets saved:
802-004C HHCS 1/4-20X3/4 GR5
804-006C WASHER LOCK SPRING 1/4 PLT
and three new
805-026C PIN ROLL 1/4 X 3/4 PLT
18. Place the sprocket
the holes. Loosely insert the bolts
and washers
in the threaded holes. Drive the roll pins
the smooth holes. Tighten bolts to specification.
Prepare New 2S-2600 LH Power Shaft
19. Select one each new:
195-346D SHAFT 7/8 HEX 32.44 LG
805-180C PIN ROLL 1/4 X 1 1/2 LG PLT
20. Drive pin
into the inner hole of the shaft
Figure 5: 2S-2600
Assemble LH Clutch
28107
U
D
Figure 6: 2S-2600:
Pin New LH Shaft
28094