Install new 2s-2600f/sgs lh power shaft – Great Plains Electric Clutch Package User Manual
Page 22
18
Electric Clutch Package
Great Plains Manufacturing, Inc.
195-073M
03/24/2009
Install New 2S-2600F/SGS LH Power Shaft
Refer to Figure 26 (which, for clarity, is a fully exploded
view, but omits the option box chain
)
20. From drill left, insert shaft
into the existing flanged
bearings
and the chains
,
in the Drive Type
bracket.
21. Select the saved ground drive sprocket
. Place
sprocket
onto the new shaft
, with the raised
hub of the sprocket to drill right (towards the bear-
ings).
22. Select one new:
805-180C PIN ROLL 1/4 X 1 1/2 LG PLT
Drive the roll pin
into the hole at the left end of
new shaft
, securing the sprocket.
Note: Do not re-mount the gauge wheel chain
until
step 38. This leaves the new shaft free to spin for
ease of installing additional components.
Figure 26: 2S-2600F/SGS:
Install LH Power Shaft
28073
U
D
F
B
L
R
b
b
c
k
n
u
b
n
u
k
k
21
c