Update 2s-2600f/sgs right hand drive, Remove 2s-2600f/sgs rh linkage, Release 2s-2600f/sgs rh drive shaft – Great Plains Electric Clutch Package User Manual
Page 25: Remove 2s-2600f/sgs rh chains and input sprocket
Great Plains Manufacturing, Inc.
Update 2S-2600F/SGS Right Hand Drive
21
03/24/2009
195-073M
Update 2S-2600F/SGS Right Hand
Drive
Remove 2S-2600F/SGS RH Linkage
Refer to Figure 30 (which depicts the standard LH linkage,
but the parts to be removed, and their general arrangement,
are identical for Option box drills on the RH side)
40. Remove individually or as an assembly:
CLUTCH SHUTOFF LINK, 00 SERIES
SPRING EXT 1 1/16 ODX.120WX5.5
These parts are not re-used.
Note: This part may be removed or left in place:
SUBFRM CLUTCH BRKT,SOLID STAND
41. Remove two sets:
and remove the:
These parts are not re-used.
Release 2S-2600F/SGS RH Drive Shaft
Remove 2S-2600F/SGS RH Chains and Input
Sprocket
Refer to Figure 31 (which, for clarity, is a fully exploded view
- remove only specified parts)
42. At the Drive Type bracket, loosen Drive Type
and
Fertilizer/SGS jackshaft idlers
.
43. Lift the Drive Type
and Fertilizer/SGS
chains off
clutch output sprockets
remove the chains.
44. At the gauge wheel, loosen idler
and lift ground
drive chain
off of sprocket
.
Do not completely remove the chain.
45. At the right end of the clutch input shaft
, drive out
the right end roll pin
. The pin is not re-used.
46. Remove and save sprocket
. Do not completely
remove chain
.
U
D
F
B
L
R
Figure 30: 2S-2600F/SGS:
Remove RH Linkage
17253
Figure 31: 2S-2600F/SGS:
RH Chains and Input Sprocket
21630
U
D
F
B
L
R
i
v
n
u
a
c
r
d
k
i
v
n
u
a
c
k
d
r
k
c