3s-3000 main box only installation, Update 3s-3000 left hand drive, Remove 3s-3000 lh linkage – Great Plains Electric Clutch Package User Manual
Page 31: Remove 3s-3000 lh shaft and clutch, Dismount clutch output chain
03/24/2009
195-073M
Great Plains Manufacturing, Inc.
Update 3S-3000 Left Hand Drive
27
3S-3000 Main Box Only Installation
This section describes installation of kit 195-078A for:
• 3S-3000 s/n S1563+ (1996+) drills with only main
seed box, and no Small Seeds/Fertilizer options or;
• 3S-3000HD drills with only a main seed box, and no
Small Seeds or Fertilizer options.
For other kits, see:
2S-2600, main box only, 195-076A kitpage 5
2S-2600, w/option box(es), 195-077A kitpage 15
3S-3000, w/option box(es), 195-078A kitpage 42
3S-4000, main box only, 195-075A kitpage 61
3S-4000, w/option box(es), 195-075A kitpage 74
Update 3S-3000 Left Hand Drive
Remove 3S-3000 LH Linkage
Refer to Figure 41 (which depicts a 2S-2600 linkage, but the
parts removed for 3S-3000 are the same)
5.
Remove individually or as an assembly:
CLUTCH SHUTOFF LINK, 00 SERIES
SPRING EXT 1 1/16 ODX.120WX5.5
These parts are not re-used.
Note: This part may be removed or left in place:
SUBFRM CLUTCH BRKT,SOLID STAND
6.
Remove two sets:
and remove the:
These parts are not re-used.
Remove 3S-3000 LH Shaft and Clutch
Dismount Clutch Output Chain
Refer to Figure 42
7.
Loosen idler
and lift chain
off of sprocket:
SPKT 40A23X1.813-1.818 BR/6HOL
Do not completely remove the chain.
U
D
F
B
L
R
Figure 41: 3S-3000:
Remove LH Linkage
17253
Figure 42: 3S-3000:
Dismount LH Clutch Chain
21627
U
D
F
B
L
R
i
n
i
n