Install 3s-3000f/sgs ctr driven shaft – Great Plains Electric Clutch Package User Manual
Page 53
Great Plains Manufacturing, Inc.
Update 3S-3000F/SGS Center Drive
49
03/24/2009
195-073M
Install 3S-3000F/SGS CTR Driven Shaft
49. Select one each new:
POWER SHAFT 7/8 HEX CTR CLUTCH
805-180C PIN ROLL 1/4 X 1 1/2 LG PLT
Drive the pin into the hole at the solid end of the
shaft (the end that is not tapped with 1/2-20 threads)
50. Insert the shaft, from the right, into the center and
left bearings
.
51. Select one saved:
808-259C SPKT 40B14 X 7/8 HEX BORE
and one new:
805-180C PIN ROLL 1/4 X 1 1/2 LG PLT
with the raised hub side to the right, place the
sprocket
on the shaft
. Drive the roll pin into
the hole at the left end of the shaft.
52. Select the saved acremeter
. Screw, hand-tight-
only, it into the 1/2-20 hole at the end of the shaft.
Figure 78: 3S-3000F/SGS:
Install CTR Driven Shaft
28150
U
D
F
B
L
R
b
o
b
b
o