Install 3s-4000f/sgs ctr torque tab, 3s-4000f/sgs center closeout, Update 3s-4000f/sgs right hand drive – Great Plains Electric Clutch Package User Manual
Page 87: Remove 3s-4000f/sgs rh linkage
Great Plains Manufacturing, Inc.
Update 3S-4000F/SGS Right Hand Drive
83
03/24/2009
195-073M
Install 3S-4000F/SGS CTR Torque Tab
Refer to Figure 134
61. Select one new:
195-345D CLUTCH TORQUE ARM TAB
and two sets new:
62. Loosely mount the tab
at the same bracket weld-
ment holes
used by the tab
63. Rotate the clutch
until the torque arm
is in the
large hole in the torque tab
64. Tighten tab bolts
3S-4000F/SGS Center Closeout
65. Select one new (not shown):
833-088C OGURA CLUTCH JUMPER HARNESS
Connect the jumper to the clutch cable.
Update 3S-4000F/SGS Right Hand
Drive
Remove 3S-4000F/SGS RH Linkage
Refer to Figure 135 (which depicts the LH linkage, but the
parts to be removed, and their general arrangement, are
identical on the RH side)
66. Remove individually or as an assembly:
CLUTCH SHUTOFF LINK, 00 SERIES
SPRING EXT 1 1/16 ODX.120WX5.5
These parts are not re-used.
Note: This part may be removed or left in place:
SUBFRM CLUTCH BRKT,SOLID STAND
67. Remove two sets:
and remove the:
These parts are not re-used.
Figure 134: 3S-4000F/SGS:
Install CTR Torque Arm Tab
28148
U
D
F
B
L
R
h
t
h
t
U
D
F
B
L
R
Figure 135: 3S-4000F/SGS:
Remove RH Linkage
17253