Great Plains Electric Clutch Package - Manual (Page 26)

22 Electric Clutch Package Great Plains Manufacturing, Inc.
195-073M 03/24/2009
Remove 2S-2600F/SGS RH Clutch for Disassembly
Refer to Figure 32 (which, for clarity, is a fully exploded view
- remove only specified parts)
47. Caution: Shaft moves, under spring tension, about
1 ⁄
2
in (13mm) to the right as pin is removed. On the
clutch drive input shaft , drive out the mid roll pin
. This pin is not re-used.
48. Move shaft to drill right. Remove:
195-186K 3S-3000F RH WING CLUTCH ASSY
from the shaft. Leave the shaft in the drill.
Disassemble 2S-2600F/SGS RH Clutch
Refer to Figure 33
49. Remove and save three sets:
802-551C HHCS 1/4-20X2 1/4 GR5
804-006C WASHER LOCK SPRING 1/4 PLT
The assembly is usually still held together by roll
pins.
50. Pry both sprockets off. Remove and save:
195-161H SPKT CLUTCH 40B23T HEX BORE
808-240C SPKT 40A23X1.813-1.818 BR/6HOL
The remaining parts are not re-used.
Pre-Assemble 2S-2600F/SGS RH Clutch
Refer to Figure 34
51. Select one each new:
823-231C OGURA CLUTCH
195-347D ELECTRIC CLUTCH ADAPTOR
and three sets new:
802-684C HHCS M8X1.25X55 GR8.8
804-157C WASHER SPRING LOCK M8 PLT
Set the clutch assembly on a work surface, with the
torque arm end of the Ogura clutch down.
52. Secure the large end of the 195-347D to the
Ogura clutch with the bolts and lock washers
. Torque to specifications (see page 93).
Figure 32: 2S-2600F/SGS:
Remove RH Clutch
21630
U
D
F
B
L
R
d
f
113
f
d
f
d
112
d
136
110
128
126
Figure 33: 2S-2600F/SGS:
Disassemble RH Clutch
16452
126
128
110
136
Figure 34: 2S-2600F/SGS:
Pre-assemble RH Clutch
28144
U
D
22
54
34
48
54
22
34
48
22
54 34
48