Great Plains Electric Clutch Package - Manual (Page 62)

58 Electric Clutch Package Great Plains Manufacturing, Inc.
195-073M 03/24/2009
3S-3000F/SGS RH Closeout
Refer to Figure 92 on page 57
117.Re-mount Drive Type chain . Make final clutch
positioning by placing clutch output sprocket in
alignment with the Drive Type sprocket (not shown).
118.Select one new (not shown):
833-088C OGURA CLUTCH JUMPER HARNESS
Connect the jumper to the clutch cable.
119.Engage chain idler for
1 ⁄
2
in (13mm) slack in long-
est chain span.
Refer to Figure 92
120.Re-mount gauge wheel chain on sprocket .
Engage idler for 1in (2.7cm) slack in longest chain
span.
Install 3S-3000F/SGS Electronics
Continue at “3S-3000/F/SGS Electrical Installation” on
page 59.
These steps are common to 3S-3000 and 3S-3000F/
SGS.
n
136
55
i
c k
a