Great Plains Electric Clutch Package - Manual (Page 7)

03/24/2009 195-073M
Great Plains Manufacturing, Inc. 3
General Information
These packages replace the standard lift-actuated
mechanical clutches on each section with electric
clutches control both by a single drill lift switch and by
cab module section switches. This is an alternative way
to provide point row capability, where point row opera-
tions do not require raising the non-planting sections
These instructions explain how to install an Electric
Clutch Package, provided as one of four kits:
Note: These instructions do not cover the case of adding
electric clutches to a drill which has previously had
the Point Row option installed. In such an unlikely
case, please have the Great Plains dealer contact
the factory for further instructions.
Each kit updates one drill. Kits are specific to the number
of drill sections, and on 2S-2600, whether or not the
Small Seeds and/or Fertilizer Options are also present:
Notations and Conventions
“Left” and “Right” are facing in the direc-
tion of machine travel. An orientation rose
in many figures shows the directions of
Left, Right, Front, Back, Up, Down.
Note: Many figures show fully exploded views. Remove
only specified parts.
A crucial point of information related to the preceding
topic. Read and follow the directions provided before
continuing, to ensure safety, avoidance of machine
damage, and to achieve desired field results.
Note: Useful information related to the preceding topic.
A glossary of abbreviations used in part descriptions is
available on page 98.
Call-Outs
Kit Kit Description
195-075A 3S-40 ELEC CL PKG SML SDS-FERT
195-076A 2S-2600 ELEC CLUTCH PKG
195-077A 2S-26 ELEC CL PKG SML SDS-FERT
195-078A 3S-3000 ELECTRIC CLUTCH PKG
Drill Model
Drill
Vintage
Small
Seeds
Uses
Kit
2S-2600 s/n DD1152+
No 195-076A
2S-2600HD any
2S-2600 s/n DD1152+
Yes
195-077A
2S-2600HD any
2S-2600F s/n DD1152+
n/a
2S-2600HDF any
3S-3000
3S-3000F
1996+, s/n S1563+
any 195-078A
3S-3000HD
3S-3000HDF
any
4S-4000
4S-4000F
s/n YY1152+
any 195-075A
4S-4000HD
4S-4000HDF
any
U
D
L
R
B
F - ,
-
Single-digit/letter callouts identify compo-
nents in the currently referenced Figure or
Figures. These references are reused for dif-
ferent items from section to section.
to Two-digit callouts in the range 11 to 61 refer-
ence new parts from the new parts lists
beginning on page 94. The descriptions
match those on the parts, bags or cartons,
and in your updated Parts Manual.
to Three-digit callouts in the range 101 to 138
reference affected existing parts from the
table on page 97. The descriptions match
those in your Parts Manual. The narrative
and table indicate any re-use of the parts.
1 9
a z
11 61
101 138