Remove 3s-3000f/sgs lh shaft and clutch, Dismount clutch output chains, Release 3s-3000f/sgs lh power shaft – Great Plains Electric Clutch Package User Manual
Page 47: Remove 3s-3000f/sgs lh power shaft, Caution, Iv u n r, Ef c a 115 k
Great Plains Manufacturing, Inc.
Update 3S-3000F/SGS Left Hand Drive
43
03/24/2009
195-073M
Remove 3S-3000F/SGS LH Shaft and Clutch
Dismount Clutch Output Chains
Refer to Figure 68
7.
Loosen Drive Type idler
and Fertilizer/SGS jack-
shaft idler
. Lift Drive Type chain
and Fertilizer/
SGS jackshaft chain
off the sprockets on:
195-187K 3S-3000F LH WING CLUTCH ASSY
Do not completely remove the chains.
Release 3S-3000F/SGS LH Power Shaft
Refer to Figure 69
8.
Loosen idler
in gauge wheel assembly.
Lift ground drive chain
off sprocket
.
Do not completely remove the chain.
9.
Drive the roll pin
out of the left end of shaft:
195-189D POWER SHAFT 7/8 HEX LH
This pin is not re-used.
10. Remove and save sprocket
.
Remove 3S-3000F/SGS LH Power Shaft
CAUTION
!
Shaft
moves, under spring tension, about
1
⁄
2
in (13mm) to
the right as the next pin is removed.
11. Drive out the middle roll pin
. Pin is not re-used.
12. Slide the shaft
out of the drill, to the right.
13. Remove the clutch for disassembly:
195-187K 3S-3000F LH WING CLUTCH ASSY
The shaft is not re-used.
Figure 68: 3S-3000F/SGS:
Remove LH Clutch Chains
21628
U
D
F
B
L
R
i
v
u
n
r
i
v
n
u
Figure 69: 3S-3000F/SGS:
Release LH Power Shaft
21628
U
D
F
B
L
R
e
f
c
a
k
a
c
k
e
k
f