Great Plains Electric Clutch Package - Manual (Page 46)

195-073M 03/24/2009
42 Electric Clutch Package Great Plains Manufacturing, Inc.
3S-3000F & 3S-3000 Small Seeds Installation
This section describes installation of kit 195-078A for:
• 3S-3000 s/n S1563+ (1996+) drills w/Small Seeds,
• 3S-3000F s/n S1563+ (1996+) drills,
• 3S-3000HD drills with Small Seeds, or;
• 3S-3000HDF drills,
… referred to as “3S-3000F/SGS” in this section.
For other kits, see:
2S-2600, main box only, 195-076A kitpage 5
2S-2600, w/option box(es), 195-077A kitpage 15
3S-3000, main box only, 195-078A kitpage 27
3S-4000, main box only, 195-075A kitpage 61
3S-4000, w/Option box(es), 195-075A kitpage 74
Update 3S-3000F/SGS Left Hand
Drive
Remove 3S-3000F/SGS LH Linkage
Steps 1-4 are on page 4.
Refer to Figure 67 (which depicts a 2S-2600 linkage, but the
parts removed for 3S-3000 are the same)
5. Remove individually or as an assembly:
195-130H CLUTCH SHUTOFF LINK, 00 SERIES
195-144D CLUTCH SHUTOFF CAM, 00 SERIES
195-254D CLUTCH PULL TAB
805-083C PIN CLEVIS 3/4 X 1 1/2
805-109C PIN COTTER 1/8 X 1 1/4 PLT
807-072C
SPRING EXT 1 1/16 ODX.120WX5.5
These parts are not re-used.
Note: This part may be removed or left in place:
195-131H SUBFRM CLUTCH BRKT,SOLID STAND
6. Remove two sets:
802-079C HHCS 3/8-16X1 1/4 GR5
804-011C WASHER FLAT 3/8 USS PLT
804-013C WASHER LOCK SPRING 3/8 PLT
803-014C NUT HEX 3/8-16 PLT
and remove the:
152-263D CLUTCH ENGAGE TAB
These parts are not re-used.
106
118
101 124
129
130
127
134
133
132
108
107
U
D
F
B
L
R
Figure 67: 3S-3000F/SGS:
Remove LH Linkage
17253
106
108
118
132
133
134
107
124
129
130
127
101