Great Plains Electric Clutch Package - Manual (Page 85)

Great Plains Manufacturing, Inc. Update 3S-4000F/SGS Center Drive 81
03/24/2009 195-073M
Disassemble 3S-4000F/SGS CTR Clutch
Refer to Figure 131
47. From the clutch assembly , remove and save
three sets:
802-152C HHCS 1/4-20X2 GR5
804-006C WASHER LOCK SPRING 1/4 PLT
48. The sprocket may still be held on by roll pins.
Remove and save the sprocket:
195-280H SPKT CLUTCH 40B23T 7/8HEX BORE
Any roll pins present, and the balance of the clutch
assembly
, are not re-used.
Pre-Assemble 3S-4000F/SGS CTR Clutch
Refer to Figure 132
49. Select one each new:
823-231C OGURA CLUTCH
195-347D ELECTRIC CLUTCH ADAPTOR
and three sets new:
802-684C HHCS M8X1.25X55 GR8.8
804-157C WASHER SPRING LOCK M8 PLT
Place the clutch on a work surface, tab end down.
50. Secure the large end of the 195-347D to the
Ogura clutch with the bolts and lock washers
. Torque to specifications.
Figure 131: 3S-4000F/SGS:
Disassemble CTR Clutch
28111
121
U
D
F
B
L
R
121
122
128
125
121
125
128
122
122
121
Figure 132: 3S-4000F/SGS:
Pre-assemble CTR Clutch
28144
U
D
22
54
34
48
54
22
34
48
22
54 34
48