Great Plains Electric Clutch Package - Manual (Page 19)

03/24/2009 195-073M
Great Plains Manufacturing, Inc. Update 2S-2600F/SGS Left Hand Drive 15
2S-2600F & 2S-2600 Small Seeds Installation
This section describes installation of kit 195-077A for:
• 2S-2600 s/n DD1152+ drills with Small Seeds,
• 2S-2600F s/n DD1152+ drills,
• 2S-2600HD drills with Small Seeds, or;
• 2S-2600HDF drills,
… referred to as “2S-2600F/SGS” in this section.
For other kits, see:
2S-2600, main box only, 195-076A kitpage 5
3S-3000, main box only, 195-078A kitpage 27
3S-3000, w/option box(es), 195-078A kitpage 42
3S-4000, main box only, 195-075A kitpage 61
3S-4000, w/option box(es), 195-075A kitpage 74
Update 2S-2600F/SGS Left Hand Drive
Remove 2S-2600F/SGS LH Linkage
Steps 1-4 are on page 4.
Refer to Figure 20 (which depicts a standard 2S-2600 link-
ages, but the parts removed for 2600F and SGS are the same)
5. Remove individually or as an assembly:
195-130H CLUTCH SHUTOFF LINK, 00 SERIES
195-144D CLUTCH SHUTOFF CAM, 00 SERIES
195-254D CLUTCH PULL TAB
805-083C PIN CLEVIS 3/4 X 1 1/2
805-109C PIN COTTER 1/8 X 1 1/4 PLT
807-072C
SPRING EXT 1 1/16 ODX.120WX5.5
These parts are not re-used.
Note: This part may be removed or left in place:
195-131H SUBFRM CLUTCH BRKT,SOLID STAND
6. Remove two sets:
802-079C HHCS 3/8-16X1 1/4 GR5
804-011C WASHER FLAT 3/8 USS PLT
804-013C WASHER LOCK SPRING 3/8 PLT
803-014C NUT HEX 3/8-16 PLT
and remove the:
152-263D CLUTCH ENGAGE TAB
These parts are not re-used.
101
106
118
108
107
132
133
134
127
130
129
124
U
D
F
B
L
R
Figure 20: 2S-2600F/SGS:
Remove LH Linkage
17253
106
108
118
132
133
134
107
124
129
130
127
101