Install 3s-3000 lh clutch – Great Plains Electric Clutch Package User Manual
Page 34
30
Electric Clutch Package
Great Plains Manufacturing, Inc.
195-073M
03/24/2009
Install 3S-3000 LH Clutch
23. Select two new:
804-061C WASHER MACH 1.50 X 1.00 X 18GA
and one new:
WING FERT CLUTCH OUTER SPCR TB
Place the washers
, followed by the spacer
, on
the shaft
24. Select one each new:
817-111C BSHG FLG 1.26IDX1.41ODX.87L
176-065D CLUTCH FRICTION WASHER
195-222D BRG 7/8 HEX ID X 1.254 OD
With any flanged ends to the right, place the bushing
, the friction washer
and the bearing
inside
the sprocket
25.
Select
three sets new:
802-152C HHCS 1/4-20X2 GR5
804-006C WASHER LOCK SPRING 1/4 PLT
Orient the sprocket
with the larger raised hub to
drill right. Place the bolts
through the lock wash-
ers
and into every other hole of the left face.
Place sprocket
, bolt face left, on the shaft
26. Select the saved:
SPKT 40A23X1.813-1.818 BR/6HOL
and one new:
WING FERT CLUTCH INNER SPCR TB
Place them on the shaft
27. Select the clutch
assembled at step 16 and one
each new:
196-877D BUSHING 1 1/8 ODX7/8 HEX BORE
839-956C KEY 1/4 X 3/16 X 3.80
Insert the bushing
Align the keyways of the bushing and the Ogura
clutch. Insert the key
28. With the tab end to drill right, place the clutch
assembly
on shaft
of the adaptor
. Screw in the
bolts, finger-tight.
29.
Select
three new
805-180C PIN ROLL 1/4 X 1 1/2 LG PLT
Drive the roll pins
into the smooth holes. Tighten
bolts to specification. Re-seat roll pins as required.
30. Move the clutch
assembly to drill left.and into the
Drive Type chain
31. Select two new:
804-061C WASHER MACH 1.50 X 1.00 X 18GA
Place them on the shaft
32. Select one new:
805-180C PIN ROLL 1/4 X 1 1/2 LG PLT
Drive the pin
into the hole at the right end of the
shaft
, to secure all the components just installed
on the shaft.
Note: One of the sprockets attached to the clutch is
unused on the standard 3S-3000. The second
sprocket is provided to ease any future upgrade to
Fertilizer and/or Small Seeds capability.
Figure 48: 3S-3000
Install LH Clutch
28154
U
D
F
B
L
R
n
21
n