Dell POWEREDGE M1000E User Manual
Page 112
112
Default Settings
SNMP logging
Disabled
Console logging
Enabled (Severity level: debug and above)
RAM logging
Enabled (Severity level: debug and above)
Persistent (FLASH) logging
Disabled
DNS
Enabled (No servers configured)
SNMP
Enabled (SNMPv1)
SNMP Traps
Enabled
Auto Configuration
Enabled
Auto Save
Disabled
Stacking (PCM6220 and PCM6348)
Enabled
Nonstop Forwarding on the Stack
(PCM6220 and PCM6348)
Enabled
sFlow
Enabled
ISDP
Enabled (Versions 1 and 2)
RMON
Enabled
TACACS+
Not configured
RADIUS
Not configured
SSH/SSL
Disabled
Telnet
Enabled
Denial of Service Protection
Disabled
Captive Portal
Disabled
Dot1x Authentication (IEEE 802.1X)
Disabled
MAC-Based Port Security
All ports are unlocked
Access Control Lists (ACL)
None configured
IP Source Guard (IPSG)
Disabled
DHCP Snooping
Disabled
Dynamic ARP Inspection
Disabled
Table 6-1. Default Settings (Continued)
Feature
Default