Dell POWEREDGE M1000E - Manual (Page 331)

Configuring SNMP 331
Configuring SNMP (Web)
This section provides information about the OpenManage Switch
Administrator pages for configuring and monitoring the SNMP agent on a
PowerConnect M6220/M6348/M8024/M8024-k switch. For details about the
fields on a page, click at the top of the page.
SNMP Global Parameters
Use the Global Parameters page to enable SNMP and Authentication
notifications.
To display the Global Parameters
page, click System → SNMP → Global
Parameters in the navigation panel.
Figure 12-1. SNMP Global Parameters
NOTE: For some features, the control to enable or disable traps is available from
a configuration page for that feature and not from the Trap Manager pages that
this chapter describes.