Configuring vlans using dell, Openmanage administrator – Dell POWEREDGE M1000E User Manual
Page 622
622
Configuring VLANs
Configuring VLANs Using Dell OpenManage Administrator
This example shows how to perform the configuration by using the Web-
based interface.
Configure the VLANs and Ports on Switch 1
Use the following steps to configure the VLANs and ports on Switch 1. None
of the hosts that connect to Switch 1 use the Engineering VLAN (VLAN
100), so it is not necessary to create it on that switch.
To configure Switch 1:
1 Create the Marketing, Sales, and Payroll VLANs.
a
From the Switching → VLAN → VLAN Membership page, click
Add.
b
In the VLAN ID field, enter 200.
c
In the VLAN Name field, enter Marketing.
d
Click Apply.
Figure 21-26. Add VLANs
e
Repeat steps b–d to create VLANs 300 (Sales) and 400 (Payroll).
2 Assign ports 16–20 to the Marketing VLAN.
a
From the Switching → VLAN → VLAN Membership page, select
200-Marketing from the Show VLAN field.