Dell POWEREDGE M1000E - Manual (Page 342)

342 Configuring SNMP
Figure 12-12. Add Notification Filter
3 Specify the name of the filter, the OID for the filter.
4 Choose whether to send (include) traps or informs to the trap recipient or
prevent the switch from sending (exclude) the traps or informs.
5 Click Apply to update the switch.
Click Show All to view information about the filters that have already been
configured.
Notification Recipients
Use the Notification Recipients page to view information for defining filters
that determine whether traps are sent to specific users, and the trap type sent.
SNMP notification filters provide the following services:
• Identifying Management Trap Targets
• Trap Filtering
• Selecting Trap Generation Parameters
• Providing Access Control Checks
To display the Notification Recipients page, click System → SNMP →
Notification Recipient in the navigation panel.