Dell POWEREDGE M1000E - Manual (Page 1221)

Managing IPv4 and IPv6 Multicast 1221
ipv6 pimsm hello-interval
seconds
Specify the number of seconds (range: 0–65535) to
wait between sending PIM hello messages on the
interface.
ipv6 pimsm bsr-border Prevent bootstrap router (BSR) messages from being
sent or received through the interface.
ipv6 pimsm dr-priority
priority
Set the priority value for which a router is elected as
the designated router (DR). The election priority
range is 0–2147483647.
ipv6 pimsm join-prune-
interval interval
Configure the interface join/prune interval for the
PIM-SM router. The interval range is 0–18000
seconds.
exit Exit to Global Config mode.
exit Exit to Privileged EXEC mode.
show ipv6 pimsm View system-wide PIM-DM information.
show ipv6 pimsm interface
vlan vlan-id
View the PIM-SM information for the specified
interface.
show ipv6 pimsm neighbor
[interface vlan vlan-id | all]
View a summary or all the details of the multicast
table.
show ipv6 pimsm rphash
groupaddr
View the RP router being selected for the specified
multicast group address from the set of active RP
routers. The RP router for the group is selected by
using a hash algorithm.
show ipv6 pimsim bsr View the bootstrap router (BSR) information.
show ipv6 pimsm rp
mapping
View group-to-RP mappings of which the router is
aware (either configured or learned from the BSR)
Command Purpose