Dell POWEREDGE M1000E - Manual (Page 700)

700 Configuring Port-Based Traffic Control
Storm Control
Use the Storm Control page to enable and configure the storm control
feature.
To display the Storm Control interface, click Switching → Ports → Storm
Control in the navigation menu.
Figure 24-4. Storm Control
Configuring Storm Control Settings on Multiple Ports
To configure storm control on multiple ports:
1 Open the Storm Control page.
2 Click Show All to display the Storm Control Settings Table.
3 In the Ports list, select the check box in the Edit column for the port to
configure.
4 Select the desired storm control settings.