Dell POWEREDGE M1000E - Manual (Page 522)

522 Configuring 802.1X and Port-Based Security
Authenticated Users
The Authenticated Users page is used to display lists of ports that have
authenticated users.
To display the Authenticated Users page, click Switching → Network
Security → Authenticated Users in the navigation panel.
Figure 19-4. Network Security Authenticated Users
Port Access Control Configuration
Use the Port Access Control Configuration page to globally enable or disable
RADIUS-assigned VLANs and to enable Monitor Mode to help troubleshoot
802.1X configuration issues.
To display the Port Access Control Configuration page, click Switching →
Network Security → Dot1x Authentication → Monitor Mode → Port Access
Control Configuration in the navigation panel.
NOTE: The VLAN Assignment Mode field is the same as the Admin Mode field on
the System → Management Security → Authorization Network RADIUS page.