Dell POWEREDGE M1000E - Manual (Page 383)

Managing Images and Files 383
Management access will be blocked for the duration of the
transfer
Are you sure you want to start? (y/n)y
5 Activate the new image (image2) so that it becomes the active image after
the switch resets.
console#boot system image2
Activating image image2 ..
6 View information about the current image.
console#show bootvar
Image Descriptions
image1 :
image2 :
Images currently available on Flash
7 Copy the running configuration to the startup configuration to save the
current configuration to NVRAM.
console#copy running-config startup-config
This operation may take a few minutes.
Management interfaces will not be available during
this time.
Are you sure you want to save? (y/n)y
Configuration Saved!
8 Reset the switch to boot the system with the new image.
console#reload
Are you sure you want to continue? (y/n)y
Reloading all switches...
------- ------------ ------------ --------------- --------------
unit image1 image2 current-active next-active
------- ------------ ------------ --------------- --------------
1 2.23.11.17 3.8.18.37 image1 image2