Ospfv3 trap flags – Dell POWEREDGE M1000E User Manual
Page 347
Advertising
Configuring SNMP
347
OSPFv3 Trap Flags
The OSPFv3 Trap Flags page is used to specify which OSPFv3 traps you want
to enable or disable. When the condition identified by an active trap is
encountered by the switch, a trap message is sent to any enabled SNMP Trap
Receivers, and a message is written to the trap log.
To access the OSPFv3 Trap Flags page, click Statistics/RMON → Trap
Manager → OSPFv3 Trap Flags in the navigation panel.
Figure 12-17. OSPFv3 Trap Flags
Advertising